Call Us Today!
0086+20+86309041

WhatsApp:
+86 15920129083

E-mail:
info@sunjoygz.com

News
Home / News / 
How to Fix The Damage in an Inflatable Equipment
Time: 2017-09-22 18:12
The daily maintenance of sunjoy inflatable equipment, patch the leaks with repair kit attached in the inflatable package.
After long time use, you may find some of your inflatables worn out, or damaged by improper use. In order to keep offering fun to the kids, you need to fix the damages quickly. In general, most of the tear damages are fairly easy to repair. All our inflatable equipment are shipped with repair kit, so you can use the tools and materials to get your inflatables back in good condition.
sunjoy spiderman bounce house slide combo

First you should confirm the damaged position before repair. If the hole is too small, it may cause a slow leak and hard to find. You can spray soapy water on the inflatable to find the hole, there will be bubble forming while inflating.

1, Patch
If the damaged position in the corner, cut the repair material into a round patch, or according to the material texture, cut into the shape larger than the hole. Before patching, be sure to clean the surface of the damaged area, and then coated with glue around the damaged, then the back of the repair material is also coated with glue and then dry for half a minute. Then cover the hold with the repair material, press it with hands or other things, do not leave any air bubbles. If the temperature is low, will affect the result of glue, it is recommended to blow some hot air with the home hair dryer, to ensure the sticky effect. Normally, a few minutes after sticking, you'll be able to use it properly. Therefore, in the process of usual use, use while maintaining is also entirely possible.

2, Inflatables were scratched
If the scratched hole is longer than 5cm should be sewn with a needle and thread, and then patched with repair material; id the hole is less than 5cm, it can be directly patched.

3, The joints come unsewn
First sew the opening of the joints with the needle and thread, sew as close together as you can, then handle the opening firmly with the method of patching, and consider the beauty at the same time.

4, Large leakage
The inflatable game after used for a long time, due to some parts of the pinhole seam widened, the amount of leakage increased, consider using the fabric pasted on the seam to reduce leakage, if the inflatables are too old, should be considered scrapped to prevent accident in business.

After you repair your inflatabe equipment, you can continue using them in your play center or renting them for parties and events. There is very important to keep your customers safe while having fun. So check your inflatable bounce houses, slides, obstacle courses periodically and doing well in maintenances. Sunjoy Inflatables is the professional inflatable toys manufacturer and supplier from China, offering you a variety of inflatable jumping castles, wet and dry slides, water games, obstacle courses, bouncer combos and so on, perfect for birthday parties, carnivals, trade shows and other celebration activities. We are responsible for all our inflatables quality, any leakage problem will be solved quickly for you. Contact sunjoy to develop a cooperation today.